Smart multimeter ANENG 683


The ANENG 683 is a smart multimeter that allows you to measure various electrical parameters such as voltage (AC/DC), current, resistance, and more. It’s a portable and versatile device, especially appreciated for its « smart » function, which automatically detects the type of measurement (voltage, resistance, etc.) without needing manual mode changes. Here’s an overview of its key features and functions:

Key Features of ANENG 683:

  1. Smart Multimeter: The ANENG 683 can automatically identify and switch between measurement modes without requiring manual adjustments.
  2. AC/DC Voltage Measurement: It can measure both direct current (DC) and alternating current (AC) voltage with good accuracy.
  3. Resistance Measurement: It allows measuring resistance in ohms (Ω).
  4. Continuity Testing: You can use this mode to check whether a circuit is open or closed, with an audible signal indicating continuity.
  5. Diode Testing: This mode allows testing diodes to ensure they are functioning properly.
  6. NCV (Non-Contact Voltage) Sensor: It detects the presence of voltage without physical contact with wires, useful for quick detection of live wiring.
  7. Backlit LCD Display: The multimeter features an LCD screen with backlighting, making it easy to read in low-light conditions.
  8. Compact and Portable Design: Its pocket-sized design makes it easy to carry for fieldwork or use in tight spaces.
  9. Overload Protection: It protects the multimeter and the user from overloads that could damage the device or pose a safety hazard.

Common Technical Specifications:

  • DC Voltage: 0 to 600V
  • AC Voltage: 0 to 600V
  • Resistance: Up to 10 MΩ or higher, depending on the model.
  • Current: Measurement range depends on the model (generally up to 10A for higher-end versions).
  • Additional Functions: Non-contact voltage detection, diode testing, continuity, backlight.

Basic Usage:

  1. Automatic Mode: For basic measurements (voltage, resistance, continuity), simply place the probes on the points to be measured, and the device will automatically identify the correct function.
  2. NCV (Non-Contact Voltage): By bringing the device near a wire or cable with voltage, the ANENG 683 detects voltage presence without direct contact.
  3. Continuity Testing: Place the probes on two points of a circuit, and listen for an audible signal if the circuit is closed.

Safety Tips for Use:

  • Always check voltage and current limits before measuring.
  • Use the NCV function to detect live wires before touching them.
  • Never use the multimeter to measure voltages beyond the maximum specified capacity.

This multimeter is ideal for electricians, DIY enthusiasts, and anyone needing a fast, reliable tool for electrical measurements.


Like it? Share with your friends!